The Digitizer

With the Digitizer, the foot measurement can be taken in different positions and under different loads. It is accurate, reliable and in true 3D. 572 pins wirth a resolution of 468'00 pixel measure the foot by gently palpating tissue, bone and cartilage. The aim is to straighten the longitudinal arch and to scan the foot profile in the natural, corrected foot position in order to obtain an insole that fits perfectly and does not cause pain or discomfort.

OrthoWin Software

The OrthoWin software allows the user to perform an in-depth analysis of the patient's foot anatomy and helps to make an accurate diagnosis. It provides the user with all the tools to make the necessary adjustments and corrections for the patient, including overlaying X-rays and placing pads or heel cups. Nevertheless every insole can be designed by the user, which makes the insole unique.  A Production Center can finish the insole according the specifications of the Measuring Centre.

The Milling Machine

Orthofit’s milling machines were the first of their kind on the market. They have been tried and tested for years and remain an international favorite thanks to their sturdy and reliable Swiss technology. Unlike other similar products on the market, Orthofit’s milling machines have a long life span for more than 20 years in average. All Orthofit’s milling machines have been designed specifically for use in the orthopedic workshop. For this reason, the machines are exceptionally precise, are easy to operate and produce a perfect insole every time ensuring thousands of satisfied customers.

All digitizers can be equipped and/or upgraded with the new design pattern-protected measure mat. 

 

In the measurement mask, the user can select between: 

  • A profile measurement 
  • A pressure measurement
  • Or simultaneously measure profile and pressure

 

In the view mask, the pressure measurement can be shown or hidden as an overlay.

 

The user can also show and hide the pressure values in the editing mask.

  • Profile measurements with the absolute pressure values are shown in Kpascal as an overlay
  • Note that pressure measurement systems only provide values with ground contact
  • The OrthoFit profile image, however, measures and shows also the areas without ground contact.

New: OrthoFit offers its customers a 3D scanner as a lower-level measuring device in addition to the digitizer.

 

Application/Advantages of the PhotoScanner:

  • Reading imprints of foam boxes
  • Lightweight, portable measuring device for external measurements
  • Lower price

 

Disadvantages:

  • No tactile foot profile measurement
  • No direct correction possibilities on the foot
  • Environmental influences

 

Milling Blocks

Orthema offers the largest range and highest quality milling blocks on the market.

Our blocks are:

  • 1, 2 and 3 components

  • Standard and wide shapes

  • Antistatic

  • 20 - 50 Shore range

  • For all CNC milling machines suitable

OrthoFit Digitizer 4D

OrthoFit 3D PhotoScan

OrthoFit 3D Printer

Industrial Mill

In addition to the existing Orthema milling machines, OrthoFit now offers it customers 3D Printers.

 

Application/Advantages of 3D Printers:

  • Firesoles library
  • Less material waste
  • Cheaper purchase

 

Disadvantages:

  • Longer production time
  • Difficult grinding and shoe fitting
  • Open for non-specialized markets
  • Limited choice of materials

 

Various printers can be connected

Various milling can be connected

In addition to the existing Orthema milling machines, OrthoFit now offers its customers industrial milling machines.

 

Application/Advantages of industrial milling devices:

  • Milling of 2, 4, or more pairs

  • Higher milling stroke in Z-direction

  • Better outline milling regarding sheets

 

Disadvantages:

  • More pollution and waste
  • More space needed
  • Less diversity in material
  • More difficult to clean and maintain

 

The Digitizer

With the Digitizer, the foot measurement can be taken in different positions and under different loads. It is accurate, reliable and in true 3D. 572 pins wirth a resolution of 468'00 pixel measure the foot by gently palpating tissue, bone and cartilage. The aim is to straighten the longitudinal arch and to scan the foot profile in the natural, corrected foot position in order to obtain an insole that fits perfectly and does not cause pain or discomfort.

The Milling Machine

Orthofit’s milling machines were the first of their kind on the market. They have been tried and tested for years and remain an international favorite thanks to their sturdy and reliable Swiss technology. Unlike other similar products on the market, Orthofit’s milling machines have a long life span for more than 20 years in average. All Orthofit’s milling machines have been designed specifically for use in the orthopedic workshop. For this reason, the machines are exceptionally precise, are easy to operate and produce a perfect insole every time ensuring thousands of satisfied customers.

OrthoWin Software

The OrthoWin software allows the user to perform an in-depth analysis of the patient's foot anatomy and helps to make an accurate diagnosis. It provides the user with all the tools to make the necessary adjustments and corrections for the patient, including overlaying X-rays and placing pads or heel cups. Nevertheless every insole can be designed by the user, which makes the insole unique.  A Production Center can finish the insole according the specifications of the Measuring Centre.

Milling Blocks

Orthema offers the largest range and highest quality milling blocks on the market.

Our blocks are:

  • 1, 2 and 3 components

  • Standard and wide shapes

  • Antistatic

  • 20 - 50 Shore range

  • For all CNC milling machines suitable

OrthoFit Digitizer 4D

All digitizers can be equipped and/or upgraded with the new design pattern-protected measure mat. 

 

In the measurement mask, the user can select between: 

  • A profile measurement 

  • A pressure measurement

  • Or simultaneously measure profile and pressure

 

In the view mask, the pressure measurement can be shown or hidden as an overlay.

 

The user can also show and hide the pressure values in the editing mask.

  • Profile measurements with the absolute pressure values are shown in Kpascal as an overlay

  • Note that pressure measurement systems only provide values with ground contact

  • The OrthoFit profile image, however, measures and shows also the areas without ground contact.

 

OrthoFit 3D PhotoScan

New: OrthoFit offers its customers a 3D scanner as a lower-level measuring device in addition to the digitizer.

 

Application/Advantages of the PhotoScanner:

  • Reading imprints of foam boxes

  • Lightweight, portable measuring device for external measurements

  • Lower price

 

Disadvantages:

  • No tactile foot profile measurement

  • No direct correction possibilities on the foot

  • Environmental influences

OrthoFit 3D Printer

In addition to the existing Orthema milling machines, OrthoFit now offers its customers 3D Printers.

 

Application/Advantages of the PhotoScanner:

  • Firesole library
  • Less material waste
  • Cheaper purchase

 

Disadvantages:

  • Longer production time
  • Difficult grinding and shoe fitting
  • Open for non-specialized markets
  • Limited choice of materials

Various printers can be connected

In addition to the existing Orthema milling machines, OrthoFit now offers its customers industrial milling machines.

 

Application/Advantages of the industrial milling devices:

  • Milling of 2,4, or more pairs

  • Higher milling stroke in Z-direction

  • Better outline milling regarding sheets

 

Disadvantages:

  • More pollution and waste

  • More space needed

  • Less diversity in material

  • More difficult to clean and maintain

Industrial Mill

Various milling can be connected